PAPR PARTS INTELLIGENCE — FIELD REFERENCE EN 12941 · NIOSH 42 CFR 84 · AS/NZS 1716
PAPR PARTS INTELLIGENCE

SEC 02 // PART RECORD

261704 Miller Breathing Tube Assembly (Face Shield PAPR)

Verified against primary source · 2026-07-06 hose · current · US

Fits these systems

Systems this part fits, with compatibility status and evidence
SystemCompatibility statusEvidence
Miller Face Shield PAPR T2 Manufacturer-listed part
  1. [01] www.millerwelds.com manufacturer manual Item 12 of Figure 10-2 "Faceshield PAPR Blower Assembly" parts table, Section 10, p.31 of Miller OM-288359A (2021-07): "261704 — Breathing Tube Assembly, Qty 1". Connection procedure in Section 6-5 Attaching The Breathing Tube, p.17; maintenance note in Section 7, p.24. Archived at sources/miller-o288359a_mil.pdf. 2026-07-06

Specifications

Technical specifications
Blower connectionAlign pins on the blower-end connector with channels in the blower receptacle, insert until snug, then turn connector 1/8 turn clockwise (Section 6-5)
Helmet connectionWhile pressing the blue locking tabs in, push the rectangular connector onto the helmet air inlet until it locks (Section 6-5)
CoverFR Breathing Tube Cover (265312) available separately
MaintenanceInspect breathing tube and replace if damaged or if inside of tube is dirty (Section 7)

STOCKED BY — SUPPLIER CROSS-REFERENCE

Stocked by

See the full supplier directory for all regions and evidence notes.

Listing ≠ endorsement. Confirm availability, approval status and source evidence before purchase or regulated workplace use.

Record sources

Evidence — dated sources
  1. [01] www.millerwelds.com manufacturer manual OM-288359A Section 6-5 (p.17), Section 7 (p.24), Section 10 (p.31). 2026-07-06