261704 — Miller Breathing Tube Assembly (Face Shield PAPR)

Pasuje do tych systemów

Systems this part fits, with compatibility status and evidence
System	Status zgodności	Dowody
Miller Face Shield PAPR	T2 Manufacturer-listed part	[01] www.millerwelds.com manufacturer manual Item 12 of Figure 10-2 "Faceshield PAPR Blower Assembly" parts table, Section 10, p.31 of Miller OM-288359A (2021-07): "261704 — Breathing Tube Assembly, Qty 1". Connection procedure in Section 6-5 Attaching The Breathing Tube, p.17; maintenance note in Section 7, p.24. Archived at sources/miller-o288359a_mil.pdf. 2026-07-06

Specyfikacje

Technical specifications
Blower connection	Align pins on the blower-end connector with channels in the blower receptacle, insert until snug, then turn connector 1/8 turn clockwise (Section 6-5)
Helmet connection	While pressing the blue locking tabs in, push the rectangular connector onto the helmet air inlet until it locks (Section 6-5)
Cover	FR Breathing Tube Cover (265312) available separately
Maintenance	Inspect breathing tube and replace if damaged or if inside of tube is dirty (Section 7)

STOCKED BY — SUPPLIER CROSS-REFERENCE

Find a supplier

No exact store listing is recorded for this part. Continue with the documented system parts record, the supplier directory, or contact the affiliated UK store or US store to identify the correct regional SKU. An enquiry is not a claim of current stock or that another SKU is a substitute.

The Face Mask Store (UK), USA Face Mask Store and this site have the same owner. These links are commercial enquiry routes.

Listing ≠ endorsement. Confirm availability, approval status and source evidence before purchase or regulated workplace use.

Źródła rekordu

Evidence — dated sources

[01] www.millerwelds.com manufacturer manual OM-288359A Section 6-5 (p.17), Section 7 (p.24), Section 10 (p.31). 2026-07-06