SEC 02 // PART RECORD
288350 Miller Lens, Face Shield PAPR, Shade 5
Fits these systems
| System | Compatibility status | Evidence |
|---|---|---|
| Miller Face Shield PAPR | T2 Manufacturer-listed part |
|
Specifications
| Shade | 5 (see Lens Shade Selection Table, Section 1-4, for process guidance) |
|---|---|
| Material | Polycarbonate (PC), injection molded |
| Dimensions | Length 8.4 in (213 mm), Width 8.6 in (218 mm), Thickness 0.8 in (2.1 mm) |
| Standards | Meets ANSI Z87.1 and CSA Z94.3 |
STOCKED BY — SUPPLIER CROSS-REFERENCE
Find a supplier
No exact store listing is recorded for this part. Continue with the documented system parts record, the supplier directory, or contact the affiliated UK store or US store to identify the correct regional SKU. An enquiry is not a claim of current stock or that another SKU is a substitute.
The Face Mask Store (UK), USA Face Mask Store and this site have the same owner. These links are commercial enquiry routes.
Listing ≠ endorsement. Confirm availability, approval status and source evidence before purchase or regulated workplace use.
Record sources
Evidence — dated sources
- [01] www.millerwelds.com manufacturer manual OM-288359A Section 9-1 (p.26) and Section 10 (p.30). 2026-07-06