PAPR PARTS INTELLIGENCE — RÉFÉRENCE TERRAIN EN 12941 · NIOSH 42 CFR 84 · AS/NZS 1716
PAPR PARTS INTELLIGENCE
I18N Interface traduite automatiquement. Les données des pièces, les spécifications et les éléments de preuve restent en anglais ; la version anglaise fait foi.

SEC 02 // FICHE PIÈCE

277222 Miller Flow Meter (Face Shield PAPR)

Verified against primary source · 2026-07-06 other · current · US

Compatible avec ces systèmes

Systems this part fits, with compatibility status and evidence
SystèmeStatut de compatibilitéPreuve
Miller Face Shield PAPR T2 Manufacturer-listed part
  1. [01] www.millerwelds.com manufacturer manual Item 14 of Figure 10-2 "Faceshield PAPR Blower Assembly" parts table, Section 10, p.31 of Miller OM-288359A (2021-07): "277222 — Flow Meter, Qty 1". Use procedure in Section 6-8 Testing Airflow, p.20. Archived at sources/miller-o288359a_mil.pdf. 2026-07-06

Caractéristiques

Technical specifications
FunctionDisconnect breathing tube from hood, insert flowmeter into breathing tube, hold straight up, and start blower; air flow is adequate if the flowmeter ball moves above the MIN mark (Section 6-8)
Test intervalAlways test air flow before using the respirator; also check monthly if not used regularly (Section 6-8)

STOCKED BY — SUPPLIER CROSS-REFERENCE

Find a supplier

No exact store listing is recorded for this part. Continue with the documented system parts record, the supplier directory, or contact the affiliated UK store or US store to identify the correct regional SKU. An enquiry is not a claim of current stock or that another SKU is a substitute.

The Face Mask Store (UK), USA Face Mask Store and this site have the same owner. These links are commercial enquiry routes.

Listing ≠ endorsement. Confirm availability, approval status and source evidence before purchase or regulated workplace use.

Sources de la fiche

Evidence — dated sources
  1. [01] www.millerwelds.com manufacturer manual OM-288359A Section 6-8 (p.20) and Section 10 (p.31). 2026-07-06