PAPR PARTS INTELLIGENCE — FIELD REFERENCE EN 12941 · NIOSH 42 CFR 84 · AS/NZS 1716
PAPR PARTS INTELLIGENCE

SEC 02 // PART RECORD

22-50-01 Tecmen FreFlow V1/V3 Standard Battery

Audit-supported — live re-check pending · 2026-07-06 battery · current · UK, EU

Supersession chain

22-50-01Tecmen FreFlow V1/V3 Standard Battery Audit-supported — live re-check pending WITHDRAWN
Superseded by ↓
22-50-02Tecmen FreFlow V3 Heavy Duty Battery (fits V1 system) Audit-supported — live re-check pending CURRENT

Fits these systems

Systems this part fits, with compatibility status and evidence
SystemCompatibility statusEvidence
Tecmen FreFlow V1 / V3 PAPR T2 Manufacturer-listed part
  1. [01] advancedweldingsupplies.com distributor UK distributor lists "V1 Standard Battery: V1BA TM 3 00 (22 50 01) SAFE3863" for "FreFlow V1 PAPR blower unit systems", with runtime "up to 9 hours use on a low (170 lpm) setting or 5 hours on a high" setting. 2026-07-06
  2. [02] www.tecmen.com manufacturer page Official Tecmen FreFlow V1 page confirms the blower's Li-ion battery runtime (9h at 170+lpm, 5-6h at 210+lpm), 1-hour charge time and >=500 charge-cycle life, matching the distributor listings for this specific battery (part number not given on the official page). 2026-07-06

Specifications

Technical specifications
Distributor SKU aliasesSAFE3863; catalogued as "V1BA TM3 00"
RuntimeUp to 9 hours at 170+ lpm (low) or 5-6 hours at 210+ lpm (high), per Tecmen's official blower spec
Charge time1 hour (per official FreFlow blower spec table)
ChargerUse with standard charger 25-10-01 (V1BC TM3 00) or fast charger V1FBC-TM3-00

STOCKED BY — SUPPLIER CROSS-REFERENCE

Stocked by

No brand-matched suppliers are listed on this record yet. Check the supplier directory for the full evidence-backed directory.

Listing ≠ endorsement. Confirm availability, approval status and source evidence before purchase or regulated workplace use.

Notes

unverified: an EU (Latvia-based) distributor, valtec-shop.com, lists a "battery-tecmen-standard-vafba-tm3-00-14.4v3.2ah" product described as the "replacement standard battery for the Tecmen Freflow V3" with a 14.4V/3.2Ah rating and the same 9h/5-6h runtime — this was previously cited here as independent EU corroboration for 22-50-01. That is now in doubt: advancedweldingsupplies.com (UK) independently lists the identical code "VAFBA TM3 00" as a DIFFERENT product, the "TM-H2 Fast Charge 4 amp" battery for the respiratory-hood line, not the FreFlow V1/V3 standard battery. Since two distributors disagree about what "VAFBA TM3 00" denotes, valtec-shop.com has been dropped as corroborating evidence for this record and the EU price/voltage figures it supplied have been removed pending clarification. A separate "V1 Fast Charge Battery" (V1FBA TM3 00 / SAFE3882) also exists per UK distributor listings; not modeled as its own record in this pass.

Price guide

~GBP 110-135 ex. VAT (UK)

Record sources

Evidence — dated sources
  1. [01] advancedweldingsupplies.com distributor 2026-07-06
  2. [02] www.tecmen.com manufacturer page 2026-07-06