287177 — Miller PAPR II Shoulder Straps (Gen 2)

Fits these systems

Systems this part fits, with compatibility status and evidence
System	Compatibility status	Evidence
Miller Miller PAPR II (Gen 2)	T2 Manufacturer-listed part	[01] www.millerwelds.com manufacturer manual OM-OTC-287373 Rev D (2024-07) Section 5-10 "Installing Shoulder Strap" (p.21) diagram labels "1 Shoulder Strap" under "Gen 2 PAPR" and instructs "Connect snaps on shoulder straps to links on belt." Section 1 safety precautions (p.2) states the belt/shoulder-strap combination must not be used as a safety harness. Listed as item 9, part 287177, "Shoulder Straps (Gen 2)," in Section 8 Parts List Figure 8-1 (p.26). Archived at sources/miller-o287373d_mil.pdf. 2026-07-06

Specifications

Technical specifications
Installation	Snaps on the shoulder straps connect to links on the belt (Section 5-10)
Safety limitation	"Do not use the powered air purifying respirator belt and shoulder straps as a safety harness."

STOCKED BY — SUPPLIER CROSS-REFERENCE

Find a supplier

No exact store listing is recorded for this part. Continue with the documented system parts record, the supplier directory, or contact the affiliated UK store or US store to identify the correct regional SKU. An enquiry is not a claim of current stock or that another SKU is a substitute.

The Face Mask Store (UK), USA Face Mask Store and this site have the same owner. These links are commercial enquiry routes.

Listing ≠ endorsement. Confirm availability, approval status and source evidence before purchase or regulated workplace use.

Record sources

Evidence — dated sources

[01] www.millerwelds.com manufacturer manual OM-OTC-287373 Rev D (2024-07), Sections 1, 5-10, and 8 (pp.2, 21, 26). 2026-07-06