SEZ 02 // SCHEDA RICAMBIO
287170 Miller PAPR II HEPA Particulate Filter (Gen 2)
Compatibile con questi sistemi
| Sistema | Stato di compatibilità | Prove |
|---|---|---|
| Miller Miller PAPR II (Gen 2) | T1 Officially approved |
|
Specifiche tecniche
| Pack sizes (order codes) | 287170-2 (2-pack), 287170-6 (6-pack), 287170-36 (36-pack) |
|---|---|
| Media | Particulate (HEPA), part of the "PAPR-P2 Filter Assembly" filtering particulate down to 0.3 micrometers |
| Mandatory stack | Must always be installed together with the foam prefilter (235674) and spark guard screen (235676) inside the filter cover (287175) — "Do not use the respirator without the spark guard screen, foam prefilter, and particulate (HEPA) filter installed." |
| Replacement rule | Replace damaged or dirty filters. Do not wash, clean with compressed air, or reuse. |
STOCKED BY — SUPPLIER CROSS-REFERENCE
Find a supplier
No exact store listing is recorded for this part. Continue with the documented system parts record, the supplier directory, or contact the affiliated UK store or US store to identify the correct regional SKU. An enquiry is not a claim of current stock or that another SKU is a substitute.
The Face Mask Store (UK), USA Face Mask Store and this site have the same owner. These links are commercial enquiry routes.
Listing ≠ endorsement. Confirm availability, approval status and source evidence before purchase or regulated workplace use.
Note
Site convention: this record uses the canonical bare part number 287170 even though Miller only sells it under the three pack-size order codes 287170-2 / 287170-6 / 287170-36 (no bare "287170" SKU exists on its own) — mirrors how the 3M Adflo pack-size SKUs are recorded on this site.
Fonti della scheda
- [01] www.millerwelds.com manufacturer manual OM-OTC-287373 Rev D (2024-07), Section 5-1 (p.13) and Section 8 (p.26). 2026-07-06