PAPR PARTS INTELLIGENCE — RÉFÉRENCE TERRAIN EN 12941 · NIOSH 42 CFR 84 · AS/NZS 1716
PAPR PARTS INTELLIGENCE
I18N Interface traduite automatiquement. Les données des pièces, les spécifications et les éléments de preuve restent en anglais ; la version anglaise fait foi.

SEC 02 // FICHE PIÈCE

287170 Miller PAPR II HEPA Particulate Filter (Gen 2)

Verified against primary source · 2026-07-06 filter · current · US

Compatible avec ces systèmes

Systems this part fits, with compatibility status and evidence
SystèmeStatut de compatibilitéPreuve
Miller Miller PAPR II (Gen 2) T1 Officially approved
  1. [01] www.millerwelds.com manufacturer manual OM-OTC-287373 Rev D (2024-07) Section 5-1 "Respirator Specifications" (p.13) states verbatim: "Standard Air Filter: PAPR-P2 Filter Assembly Consisting Of A Spark Guard Screen, Foam Prefilter, And Particulate (HEPA) Filter - All Part Of The NIOSH-Approved PAPR Approved To Filter Particulate Down To 0.3 Micrometers In Size." Listed as item 2, part 287170 (with -2/-6/-36 pack-size order codes), in Section 8 Parts List Figure 8-1 (p.26). Archived at sources/miller-o287373d_mil.pdf. 2026-07-06

Caractéristiques

Technical specifications
Pack sizes (order codes)287170-2 (2-pack), 287170-6 (6-pack), 287170-36 (36-pack)
MediaParticulate (HEPA), part of the "PAPR-P2 Filter Assembly" filtering particulate down to 0.3 micrometers
Mandatory stackMust always be installed together with the foam prefilter (235674) and spark guard screen (235676) inside the filter cover (287175) — "Do not use the respirator without the spark guard screen, foam prefilter, and particulate (HEPA) filter installed."
Replacement ruleReplace damaged or dirty filters. Do not wash, clean with compressed air, or reuse.

STOCKED BY — SUPPLIER CROSS-REFERENCE

Find a supplier

No exact store listing is recorded for this part. Continue with the documented system parts record, the supplier directory, or contact the affiliated UK store or US store to identify the correct regional SKU. An enquiry is not a claim of current stock or that another SKU is a substitute.

The Face Mask Store (UK), USA Face Mask Store and this site have the same owner. These links are commercial enquiry routes.

Listing ≠ endorsement. Confirm availability, approval status and source evidence before purchase or regulated workplace use.

Remarques

Site convention: this record uses the canonical bare part number 287170 even though Miller only sells it under the three pack-size order codes 287170-2 / 287170-6 / 287170-36 (no bare "287170" SKU exists on its own) — mirrors how the 3M Adflo pack-size SKUs are recorded on this site.

Sources de la fiche

Evidence — dated sources
  1. [01] www.millerwelds.com manufacturer manual OM-OTC-287373 Rev D (2024-07), Section 5-1 (p.13) and Section 8 (p.26). 2026-07-06