ABSCHNITT 02 // TEILEDATENSATZ
292753 Miller PAPR (Complete System) — T94 HDV Head Assembly
Passt zu diesen Systemen
| System | Kompatibilitätsstatus | Nachweis |
|---|---|---|
| Miller Miller PAPR II (Gen 2) | T2 Manufacturer-listed part |
|
Spezifikationen
| Configuration | T94, fixed-position auto-darkening lens welding helmet |
|---|---|
| Includes | Per Figure 8-4 parts table (item breakdown under 292753): helmet assembly 260821 (helmet, headgear, FR head seal), headgear 260486, breathing tube assembly 261704, FR head seal 260926, flowmeter 277222 — no blower/motor part number is listed under this or any item in Figure 8-4, and OM-OTC-287372 has no blower section |
| NIOSH | Manufactured by OTOS Tech Co. Ltd. for Miller under NIOSH approval numbers TC21C-1239 / TC21C-1342 / TC21C-1345 / TC21C-1198 (per Section 4, model not individually mapped to a number in this table) |
STOCKED BY — SUPPLIER CROSS-REFERENCE
Find a supplier
No exact store listing is recorded for this part. Continue with the documented system parts record, the supplier directory, or contact the affiliated UK store or US store to identify the correct regional SKU. An enquiry is not a claim of current stock or that another SKU is a substitute.
The Face Mask Store (UK), USA Face Mask Store and this site have the same owner. These links are commercial enquiry routes.
Listing ≠ endorsement. Confirm availability, approval status and source evidence before purchase or regulated workplace use.
Hinweise
Complete-system T94 SKU. Section 4 (NIOSH Approval, Cautions, and Limitations, page 12) states the T94-R, T94i-R, T94i-R XL and Face Shield PAPRs are manufactured by OTOS Tech Co. Ltd. for Miller under NIOSH approval numbers TC21C-1239, TC21C-1342, TC21C-1345, TC21C-1198 — the manual does not map each individual TC number to a specific model in one table, so this is recorded as manufacturer-listed rather than officially-approved (no approval label itself was inspected). Correction: the "Includes" spec previously stated this SKU includes a "blower/PAPR unit" — re-checked against the Figure 8-4 parts table (page 39) directly and no blower/motor part number appears there or anywhere in OM-OTC-287372 (a manual scoped to PAPR Head Assemblies only); the Includes line has been corrected to list only the components the table actually shows.
Datensatzquellen
- [01] www.millerwelds.com manufacturer manual Item 1, Part No. 292753, "PAPR (Complete System)", Figure 8-4 "Powered Air Purifying Respirator (PAPR) T94 HDV Head Assembly" parts table, page 39 (OM-OTC-287372 Rev. F). 2026-07-06