I18N Maskinöversatt gränssnitt. Delarnas data, specifikationer och belägg finns kvar på engelska; den engelska versionen är den auktoritativa.

AVSNITT 01 // SYSTEMPOST

Kemppi PFU 210e Powered Filter Unit

Verified against primary source · 2026-07-06 current

Kemppi's welding PAPR blower unit. Filters ambient air and supplies it to the hood of a compatible welding helmet, creating positive pressure inside the headpiece. Per the official operating manual, PFU 210e is compatible with the Gamma GTH3, Beta FA and Zeta welding-helmet models, and the protection class achieved depends on which headtop it is paired with.

Godkännandeklass

Approval standards, classes and regions
StandardClassRegion
EN 12941TH3UK/EU
EN 12941TH2UK/EU
AS/NZS 1716:2012P2AU/NZ
AS/NZS 1716:2012P1AU/NZ
Varning för generationer och artikelnummer: Protection class is set by the headtop pairing, not by the blower alone. Per the manual's Technical data table: with Gamma GTH3 or Zeta models the system is certified EN 12941 class TH3 (AS/NZS 1716:2012 class P2); with Beta FA it is only EN 12941 class TH2 (AS/NZS 1716:2012 class P1). Treat "Kemppi PFU 210e" alone as ambiguous — always record which headtop it was sold/used with before quoting a protection class. The blower also ships in two battery variants, SD (14.4V 3.2Ah/46Wh) and HD (14.4V 6.4Ah/92Wh), which are separate ordering codes (SP012584 / SP012021) rather than a package-level split; both fit the same blower body.

Kompatibla headtops

Delar i vår databas

Parts recorded for this system with category and compatibility status
ArtikelnummerDelKategoriKompatibilitetsstatus
SP012021 PFU 210e Battery HD battery T2 Manufacturer-listed part
SP012584 PFU 210e Battery SD battery T2 Manufacturer-listed part
SP010243 PFU 210e Belt belt T2 Manufacturer-listed part
SP011996 PFU 210e Blower Unit Pack (body, filter cover, belt) blower T2 Manufacturer-listed part
SP012217 PFU 210e Body of Blower Unit blower T2 Manufacturer-listed part
SP012426 PFU 210e Battery Charger charger T2 Manufacturer-listed part
SP010415 PFU 210e Particle Filter Life+ (1 pc) filter T2 Manufacturer-listed part
SP010415MP PFU 210e Particle Filter Life+ (20 pcs, bulk pack) filter T2 Manufacturer-listed part
SP009934 PFU 210e Gas Filter Life+ (A1B1E1) gas-cartridge T2 Manufacturer-listed part
SP011894 PFU 210e Harness (shoulder) harness T2 Manufacturer-listed part
SP027163 PFU 210e Odor Prefilter (10 pcs) odour-pad T2 Manufacturer-listed part
SP012095 PFU 210e Filter Cover other T2 Manufacturer-listed part
SP012492 PFU 210e Flow Meter other T2 Manufacturer-listed part
SP9320002 PFU 210e Prefilter (10 pcs) prefilter T2 Manufacturer-listed part
SP9320002MP PFU 210e Prefilter (100 pcs, bulk pack) prefilter T2 Manufacturer-listed part
SP9320003 PFU 210e Spark Arrester (10 pcs) spark-arrestor T2 Manufacturer-listed part

Anteckningar

First Kemppi record on the site. The manual's own safety section (ch. 2) states: "It is strictly forbidden to use any other than Kemppi branded filters or other parts or accessories with Kemppi's personal protection equipment" — reinforcing that every fits[] entry for this system should stay at manufacturer-listed tier (no approval-label photo seen) but is the manufacturer's own required-parts stance, not a loose recommendation.

Postens källor

Evidence — dated sources
  1. [01] resources.userdoc.kemppi.com manufacturer manual Official Kemppi PFU 210e Operating manual, document 1920690 R05 (© Kemppi Oy 2024). Section 1.1 "About PFU 210e" states compatibility with "Gamma GTH3, Beta FA and Zeta models". Section 9 "Technical data" table gives "Compliance with standards": PFU 210e EN12941:1998+A1:2004 +A2:2008 — "With Beta FA: TH2 class", "With Gamma GTH3: TH3 class", "With Zeta models: TH3 class" — and AS/NZS 1716:2012 — "With Beta FA: P1 class", "With Gamma GTH3: P2 class", "With Zeta models: P2 class". Same table lists compliance with Regulation (EU) 2016/425 and the UK PPE Regulation as amended, notified bodies FORCE Certification A/S (No. 0200, Module B) and CCQS Certification Services Limited (No. 2834, Module D), and UKCA approved body CCQS UK Ltd (No. 1105, Modules B & D). Archived in repo: sources/kemppi-pfu-210e-operating-manual.pdf. 2026-07-06