SEK. 02 // REKORD CZĘŚCI
282077 Miller PAPR II Battery Charger, 16.8V 2A (Gen 2)
Pasuje do tych systemów
| System | Status zgodności | Dowody |
|---|---|---|
| Miller Miller PAPR II (Gen 2) | T2 Manufacturer-listed part |
|
Specyfikacje
| Output | 16.8 V, 2 A |
|---|---|
| Charge time | About three hours |
| Status lights | Red = charging; Green = fully charged. "If red light flashes during charging, stop charging for 30 minutes then charge battery an additional 20 minutes (green light will be on)." |
| Compatible batteries | Per Section 7 troubleshooting table, "Use charger 282077 for battery 282076 and battery 287178" (287178 already on file as the Gen 2 blower battery; 282076 not yet a separate record on this site) |
STOCKED BY — SUPPLIER CROSS-REFERENCE
Stocked by
- Baker's Gas & Welding Supplies US
- Cyberweld US
- Welder Supply US
- Weldfabulous US
- Weldready CA
- Welding Supplies from IOC US
No listed suppliers for this region — see the supplier directory.
See the full supplier directory for all regions and evidence notes.
Listing ≠ endorsement. Confirm availability, approval status and source evidence before purchase or regulated workplace use.
Uwagi
Confirms the Gen-1/Gen-2 charger split already documented on miller-244131 and miller-287178: charger 244132 serves only Gen-1 battery 244131, while this charger 282077 serves 282076 and 287178. Battery 282076 is not yet a separate record on this site — worth adding in a future pass (it appears to be an "intermediate"-generation Miller PAPR battery per the existing miller-244131.yaml notes).
Źródła rekordu
Evidence — dated sources
- [01] www.millerwelds.com manufacturer manual OM-OTC-287373 Rev D (2024-07), Sections 5-2, 7, and 8 (pp.14, 25, 26). 2026-07-06