I18N Interfaccia tradotta automaticamente. I dati sui ricambi, le specifiche tecniche e le prove documentali restano in inglese; la versione inglese è quella autorevole.

SEZ 02 // SCHEDA RICAMBIO

287170 Miller Filter, Particulate (HEPA) (Face Shield PAPR)

Verified against primary source · 2026-07-06 filter · current · US

Compatibile con questi sistemi

Systems this part fits, with compatibility status and evidence
SistemaStato di compatibilitàProve
Miller Face Shield PAPR T2 Manufacturer-listed part
  1. [01] www.millerwelds.com manufacturer manual Item 2 of Figure 10-2 "Faceshield PAPR Blower Assembly" parts table, Section 10, p.31 of Miller OM-288359A (2021-07): "287170-2 — Filter, Particulate (HEPA) 2 Pack, Qty 1"; "287170-6 — Filter, Particulate (HEPA) 6 Pack, Qty 1"; "287170-36 — Filter, Particulate (HEPA) 36 Pack, Qty 1". Filter/spark-guard/prefilter install sequence shown in Section 6-4, p.16. Archived at sources/miller-o288359a_mil.pdf. 2026-07-06

Specifiche tecniche

Technical specifications
Pack sizes (SKU suffix)287170-2 (2-pack); 287170-6 (6-pack); 287170-36 (36-pack)
FiltrationParticulate (HEPA), part of the NIOSH-approved PAPR; approved to filter particulate down to 0.3 micrometers in size
Install stackFitted with Spark Guard (235676) and Foam Prefilter (235674) under the Filter Cover (287175); see Section 6-4
HandlingDo not wash filters, clean with compressed air, or reuse dirty air filters (Section 1-2 hazard notice)

STOCKED BY — SUPPLIER CROSS-REFERENCE

Find a supplier

No exact store listing is recorded for this part. Continue with the documented system parts record, the supplier directory, or contact the affiliated UK store or US store to identify the correct regional SKU. An enquiry is not a claim of current stock or that another SKU is a substitute.

The Face Mask Store (UK), USA Face Mask Store and this site have the same owner. These links are commercial enquiry routes.

Listing ≠ endorsement. Confirm availability, approval status and source evidence before purchase or regulated workplace use.

Note

Filter Lifetime is tracked on the blower's on-board hour meter (max 500 h shown as "MAX 500H" on the Information > Filter Lifetime screen, Section 6-7, p.19) — a separate figure from the battery's 500-charge-cycle life spec (Section 6-1, p.14). Do not conflate the two "500"s.

Fonti della scheda

Evidence — dated sources
  1. [01] www.millerwelds.com manufacturer manual OM-288359A Section 6-4 (p.16) and Section 10 (p.31). 2026-07-06