PAPR PARTS INTELLIGENCE — RÉFÉRENCE TERRAIN EN 12941 · NIOSH 42 CFR 84 · AS/NZS 1716
PAPR PARTS INTELLIGENCE
I18N Interface traduite automatiquement. Les données des pièces, les spécifications et les éléments de preuve restent en anglais ; la version anglaise fait foi.

SEC 01 // FICHE SYSTÈME

Trend Airshield Pro (AIR/PRO)

Verified against primary source · 2026-07-06 current

Trend's all-in-one, self-contained powered air respirator: an integrated head-mounted hood/visor/blower unit (no separate headtop or waist pack) sold primarily into the woodworking/joinery trade — Trend's own product page markets it for "hardwood, MDF, brick, concrete and stone dust particles" and "all woodworking applications" — but it is not a welding PAPR: it is a positive-pressure loose-fitting dust respirator with no welding-fume-rated filter option. There is real crossover interest from grinders/stonemasons: the official AIR/PRO product page's own FAQ list includes "Can I use the AIR/PRO when dealing with metal grinding dust," "Can the AIR/PRO be used in mining," and "Can the Airshield be used when cutting and grinding sandstone," alongside brick/concrete/stone dust in the main description — i.e. Trend itself markets to a woodworking-plus-masonry/grinding-dust audience, not a fume/gas audience. Certified per the official page as "Positive Pressure APF20 Respiratory Protection (EN 12941:1999 TH2P)" and, in the same page's spec table and "Details" section, "Approved to standard BS EN 12941 TH2P-S" / "Respiratory protection (NPF50): BS EN 12941 TH2P-S" — Trend's own page is internally inconsistent between "TH2P" (headline bullet) and "TH2P-S" (spec table + Details + the AIR/P/1 filter's own "Filter type: TH2P-S" spec), so both are recorded here verbatim rather than picking one. Eye protection: "EN 166:2002 1B3" (medium-energy impact, liquid droplets/splashes). Sold as three plug/region SKUs: AIR/PRO (UK & Euro plug, "For UK & Eire sale only"), AIR/PRO/EUR (230V Euro plug, authorised distributors only), and AIR/PRO/ANZ (240V AU/NZ plug, AS/NZS 1716:2003 PAPR-P2 + AS/NZS 1337:1992 OVC, authorised distributors only). This record covers the AIR/PRO (UK/EU) SKU and its common wearable spares.

Classe d'homologation

Approval standards, classes and regions
StandardClassRegion
EN 12941TH2PUK/EU
EN 1661B3UK/EU
Avertissement générations et numéros de pièce : AIR/PRO is a fully integrated head-mounted unit — there is no separate headtop/blower pairing as with welding PAPR systems; "headtops" is empty by design. Known generation splits per the official product page and spares list: (1) "AIR/PRO units manufactured before June 2020 will require the new clip design for ear defenders to fit" (affects ear-defender clip WP-AIR/P/15A, not itself recorded here); (2) the fan motor (WP-AIR/P/01) and switch/contact assembly (WP-AIR/P/05) spares are each flagged "Only for non-audible alarm units (DOM pre 30/01/2025)," implying a further hardware revision around early 2025 that has not yet been fully documented on the public spares page. Do not confuse this system with the separate, higher-spec "Air Pro Max" (AIR/PRO/M / AIR/PRO/M/E, £988), which uses its own WP-AIR/PM/* spares range and is not covered by this record.

Pièces dans notre base de données

Parts recorded for this system with category and compatibility status
Numéro de piècePièceCatégorieStatut de compatibilité
AIR/P/4 Battery for Airshield Pro (AIR/PRO) battery T2 Manufacturer-listed part
AIR/P/5/EURO Battery Charger for Airshield Pro (AIR/PRO), Euro plug charger T2 Manufacturer-listed part
AIR/P/5/UK Battery Charger for Airshield Pro (AIR/PRO), UK plug charger T2 Manufacturer-listed part
WP-AIR/P/03 Headcover and Face Seal for Airshield Pro (AIR/PRO) face-seal T2 Manufacturer-listed part
AIR/P/1 TH2P-S Filter Pack for Airshield Pro (AIR/PRO) filter T2 Manufacturer-listed part
WP-AIR/P/18 Headband, new style (complete fixing) for Airshield Pro (AIR/PRO) harness T2 Manufacturer-listed part
WP-AIR/P/07 Replacement Visor for Airshield Pro (AIR/PRO) other T2 Manufacturer-listed part

Remarques

Not a welding PAPR — no welding-fume/gas filter option is offered. Included in this welding-adjacent database as a documented grinding/masonry/woodworking-dust crossover product that welders in fabrication shops sometimes buy alongside or instead of a true welding PAPR for non-welding tasks; do not represent it as suitable for welding fume.

Sources de la fiche

Evidence — dated sources
  1. [01] www.trend-uk.com manufacturer page Official Trend Tool Technology product page for AIR/PRO. Verified verbatim: description ("hardwood, MDF, brick, concrete and stone dust particles"), certification bullets ("Positive Pressure APF20 Respiratory Protection (EN 12941:1999 TH2P)", "Conforms to EN 12941:1999 TH2P, EN 166:2002 1B3, & EN 166:2001 1B3"), Details section ("Approved to standard BS EN 12941 TH2P-S", "Approved to EN166"), spec table (Airflow min. 160 l/min, Airflow fully charged 200 l/min — vs the description bullet's "210l/min", another internal inconsistency; Battery 6hrs; Charger plug type UK 3 pin & Euro 2 pin; Respiratory protection (NPF50) BS EN 12941 TH2P-S; Assigned Protection Factor APF20), full SPARES table (AIR/P/1, AIR/P/3C, AIR/P/4, AIR/P/5/UK, WP-AIR/P/01, WP-AIR/P/02, WP-AIR/P/03, WP-AIR/P/05, WP-AIR/P/07, WP-AIR/P/10, WP-AIR/P/11, WP-AIR/P/17, WP-AIR/P/18), the June-2020 ear-defender clip note, and links to "Declaration of Conformity AIR/PRO" (LEAF/EUDC/AIR/PRO V5.0) and "UKCA Declaration of Conformity for AIR/PRO" (LEAF/DC/AIRPRO V1.0). FAQ question list (not the hidden answer text) confirms grinding/mining/sandstone crossover questions are fielded on this product's own page. 2026-07-06
  2. [02] www.trend-uk.com manufacturer page Confirms a separate AIR/PRO/ANZ SKU description ("Respiratory protection to AS/NZS 1716:2003 (PAPR-P2)", "Eye protection to AS/NZS 1337:1992 high impact resistance OVC", "Removable 8 hour Ni-MH battery") cross-listed against this visor part. 2026-07-06