SEC 01 // FICHE SYSTÈME
Parweld XR943A PAPR (with XR1020 flip-up helmet)
Parweld's welding PAPR sold with the XR1020 flip-up welding & grinding helmet. TH3P certified to EN 12941:1998/A1:2004/A2:2008. Li-ion battery runs approximately 11 hours at 170 l/min or 9 hours at 220 l/min. Note: earlier research referenced the older XR940A/XR950A framing — the current products are the XR943A/XR944A generation.
Classe d'homologation
| Standard | Class | Region |
|---|---|---|
| EN 12941:1998+A1:2004+A2:2008 | TH3P | UK/EU |
Avertissement générations et numéros de pièce : Current helmet-side spares verified from Parweld's XR943A page: XR1020 helmet, XR1021 air duct/diffuser, XR1022 face seal kit, XR423 front cover lens, XR353 ADF, XR433 grinding lens, XR434 inside cover lens, XR342 headband, XR372 sweatband. Blower-side spares verified from Parweld's official PAPR spares page: XR1003 blower unit (without belt), XR1004 filter cover with purple catch, XR1005 spark arrestor, XR1006 carbon pre-filter, XR1007 P3 HEPA filter, XR1008 comfort belt with shoulder straps. Battery XR1016 (Li-ion 14.8 V, ~2.5 h charge) and charger XR1017 are distributor-evidenced — Parweld's spares page doesn't list them.
Têtes de protection compatibles
- XR1020 flip-up welding & grinding helmet
Pièces dans notre base de données
Aucune fiche pièce pour ce système pour l'instant.
Sources de la fiche
Evidence — dated sources
- [01] www.parweld.com manufacturer page Live-verified on Parweld's official XR943A page: TH3P EN 12941:1998/A1:2004/A2:2008 certification, battery 11 h @ 170 l/min / 9 h @ 220 l/min, and the helmet-side spares list above. 2026-07-04
- [02] parweld.com manufacturer page Parweld's official PAPR spares page (covers the XR940A/XR950A blower family): XR1003–XR1008 blower-side spares verified. 2026-07-04
- [03] www.craigmoreonline.co.uk distributor Distributor evidence for battery XR1016 and charger XR1017. 2026-07-04