287175 — Miller PAPR II Filter Cover (Gen 2)

Compatible avec ces systèmes

Systems this part fits, with compatibility status and evidence
Système	Statut de compatibilité	Preuve
Miller Miller PAPR II (Gen 2)	T2 Manufacturer-listed part	[01] www.millerwelds.com manufacturer manual OM-OTC-287373 Rev D (2024-07) Section 5-4 "Installing The Air Filter" (p.15) diagram labels "4 Cover" and gives the install instruction quoted above. Listed as item 5, part 287175, "Filter Cover," in Section 8 Parts List Figure 8-1 (p.26). Archived at sources/miller-o287373d_mil.pdf. 2026-07-06

Caractéristiques

Technical specifications
Function	Retainer cover that holds the spark guard screen, foam prefilter, and particulate (HEPA) filter in the correct stack order and clips onto the blower body
Installation	"Install the filter assembly by sliding the tabs on the cover into the bracket on the blower body; push down on the filter until it 'clicks' into position."

STOCKED BY — SUPPLIER CROSS-REFERENCE

Find a supplier

No exact store listing is recorded for this part. Continue with the documented system parts record, the supplier directory, or contact the affiliated UK store or US store to identify the correct regional SKU. An enquiry is not a claim of current stock or that another SKU is a substitute.

The Face Mask Store (UK), USA Face Mask Store and this site have the same owner. These links are commercial enquiry routes.

Listing ≠ endorsement. Confirm availability, approval status and source evidence before purchase or regulated workplace use.

Sources de la fiche

Evidence — dated sources

[01] www.millerwelds.com manufacturer manual OM-OTC-287373 Rev D (2024-07), Section 5-4 (p.15) and Section 8 (p.26). 2026-07-06