235676 — Miller Spark Guard (Face Shield PAPR)

Passt zu diesen Systemen

Systems this part fits, with compatibility status and evidence
System	Kompatibilitätsstatus	Nachweis
Miller Face Shield PAPR	T2 Manufacturer-listed part	[01] www.millerwelds.com manufacturer manual Item 4 of Figure 10-2 "Faceshield PAPR Blower Assembly" parts table, Section 10, p.31 of Miller OM-288359A (2021-07): "235676 — Spark Guard, Qty 1". Also shown as component 3 ("1 Spark Guard Screen") in Section 6-4 Installing The Air Filter, p.16, and referenced in the Section 1-2 hazard warning "Do not use the powered air purifying respirator without a properly installed spark guard." Archived at sources/miller-o288359a_mil.pdf. 2026-07-06

Spezifikationen

Technical specifications
Function	Outermost screen in the filter stack; without it, welding sparks can ignite the filter or damage it and allow unfiltered air into the breathing zone (Section 1-2 hazard notice)
Position	Item 1 in the filter stack (screen, then prefilter, then HEPA filter, under the cover) — Section 6-4

STOCKED BY — SUPPLIER CROSS-REFERENCE

Find a supplier

No exact store listing is recorded for this part. Continue with the documented system parts record, the supplier directory, or contact the affiliated UK store or US store to identify the correct regional SKU. An enquiry is not a claim of current stock or that another SKU is a substitute.

The Face Mask Store (UK), USA Face Mask Store and this site have the same owner. These links are commercial enquiry routes.

Listing ≠ endorsement. Confirm availability, approval status and source evidence before purchase or regulated workplace use.

Datensatzquellen

Evidence — dated sources

[01] www.millerwelds.com manufacturer manual OM-288359A Section 1-2 (p.1), Section 6-4 (p.16), Section 10 (p.31). 2026-07-06